Products
-
Portable UV Curing Machine
Industrial Manufacturing: Used for encapsulation and bonding of electronic products (e.g., assembly of components in mobile phones and computers), coating curing and repair of automotive parts, and surface treatment of plastic, metal, and other materials
-
LED UV Curing Oven (Batch Oven)
This UVLED curing box is equipped with 1 group of 365nm wave band, the optical power is 250mw/cm2, and the light emitting area is 350X350mm air-cooled UVLED cold light source, with ultraviolet radiation High illumination intensity, good spot uniformity, etc. Special product size Points, simple operation, intelligent PLC control system and high-power LED chip module provide guarantee for high curing efficiency and quality stability, and can meet Perfect use by customers in multiple fields. Reliability, stability and shorter curing times are important indicators.
-
Online LED UV Curing Oven
Online LED UV curing furnace is mainly used for glue curing in the fields of coating, bonding, lamination and disinfection of automobiles, medical care and consumer electronics.
-
Hot Bar Machine-Pulsed Heat Thermode Soldering Machine
Use thermode technology (Hot Bar) that based on rapid reflow by pulse heating to effectively solder flexible board on the PCB. Closed loop process control is used to control the time-temperature profile.
Application : Suitable for soldering TAB, FPC to PCB/FPC, and FFC to PCB; It can also meet the hot-pressing requirements of ACF and ACA.
-
Air Convection Curing Oven
It is used for online curing of thermally cured glue. The glue on the PCBA is heated by high-speed hot air, and the curing temperature and time can be set according to the glue specifications.
-
Reflow Oven Profiler
Oven temperature profiler
1. Simple and easy operation. All data are managed with database and can be quickly imported with wizard into manufacturing process for analysis.
2. With intuitive PCC technique drawing, you can know if the manufacturing process is ok and see capacity index, without viewing analysis results.
3. High efficiency. Data can be stored up to 16 times continuously and can be downloaded to computer for group data viewing.
-
UV Glue Dispensing & Curing Machine
Model: GDP-200s
All in one machine with UV glue dispensing and fast & powerful LED light curing system, safe UV wave-length selectable 365/385/395/405/415nm, applying for Camera module, BGA UV Encapsulants, LCD, TP Curing …etc. varied applications.
-
Mini UV LED curing Machine
Model: UV200INL
Bench-top conveyors consist of a moving mesh belt that passes through a chamber area with curing lamps mounted above or side for fast component curing, can be equipped standard metal halide (longwave) bulbs or LED lamps, according to the process throughput and UV glue curing requirements, can be configured with one, two, or four UV or LED flood lamps, or mixing types of lamps to accommodate a variety of curing applications.
-
Automatic V-Cutting Machine
Model: VCUT860INL
Automatic V-scoring Machine is applying to de-panel the PCBAs with V-scoring design, this machine is able to de-panel the PCBAs with “cross” v-scoring design, no operator needed, saving head count.
High efficiency, High precision and Low-cost automatic solution.
-
FPC Die Cutting Machine
Die Cutting Machine is applying to de-panel the Rigid pcb, Flexible pcb (FPC), Rigid-Flexible pcb (combination boards) with High efficiency, High accuracy and Low investment cost.
-
UV Spot Curing System
Model: SpotUV
LED UV spot curing system delivers optimized curing energy to a very precise location, can be used manually by an operator in a bench-top system or integration into a high-speed automated assembly line; typically cure LED light-curable adhesives and coatings in 1 to 10 seconds.
-
Inline One-way V-CUT Machine
- Inline One-way V-CUT Machine -
F550 is a one-way online V-CUT machine, which is mainly used for pcb on-line machine with one-way V-CUT slot, without direct human intervention and saves labor; This series is mainly used for the low-stress depaneling of PCBA with V-CUT design of SMT back end to minimize the stress damage caused by the process to the side parts. Series of models adopt PLC control, industrial computer control and precision motor control, to achieve quantitative precision control of each key production process, and has convenient HMI interface and rich software functions, which greatly facilitates the use of users. This series of models have automatic transfer docking (SMEMA) upstream production track, and can be cut through ESD belt line or with a Robot to achieve the tray output.